AURA Gas Controls
Precision Gas Control. From Source to Point of Use.
Reliable pressure control solutions for specialty, high-purity and critical gas applications.
AURA Gas Controls provides precision gas pressure-control solutions engineered for the safe and reliable handling of gases across laboratory, analytical, industrial, research, pharmaceutical, medical, specialty-gas and process applications.
AURA's configurable regulator technology enables users to select materials, pressure ranges, flow characteristics, connections and accessories according to the requirements of the individual gas and application.
Through MONILEK Oilfield, customers across the Middle East can access AURA Gas Controls technology together with MONILEK's expertise in Instrumentation, Gas Handling and Fluid Control Technologies.
PRECISION CONTROL | HIGH-PURITY GAS | 316L SS OPTIONS | SPECIALTY GAS SOLUTIONS
EX1 Series Single Stage Pressure Reducing Regulator
The AURA EX1 is a general purpose regulator designed to provide primary pressure control of gas or liquid for inlets up to 6000 psig where minor fluctuations in outlet pressure due to variable inlet pressures are accepted. AURA’s encapsulated seat design consolidates the numerous moving internal components of a standard regulator into one single piece, allowing for ease of maintenance and minimizing potential failure points. Protected by a 10-micron 360° filter, the encapsulated seat provides significantly more filtration of impurities than the standard pressed-in disk. The encapsulated seat also filters damaging particles from all inlet ports rather than just the pipeline port. Available with multiple seat materials and orifice sizes, the EX1’s capsule ensures optimum performance in any application. AURA’s proprietary machining process yields surface finishes of 4-25 Ra designed to reduce corrosion. With its minimal internal volume, the EX1 also allows less gas to be used while purging. The AURA EX1 is assembled in a Class 100 clean room as a complete assembly with all gauges, fittings, and valves attached. The complete assembly is cleaned for oxygen service and is 100% helium leak checked. Additionally, the EX1 undergoes multiple flow and function tests to ensure the highest level of purity and durability.
EX2 Series Two Stage Pressure Reducing Regulator
The AURA EX2 is designed to provide consistent primary pressure control of gas or liquid for inlets up to 6000 psig where minor fluctuations in outlet pressure due to decaying inlet pressures are not acceptable. AURA’s dual encapsulated seat design consolidates the numerous moving internal components of a standard regulator into one single piece, allowing for ease of maintenance and minimizing potential failure points. Protected by a 10-micron 360° filter, the encapsulated seat provides significantly more filtration of impurities than the standard pressed-in disk. The encapsulated seat also filters damaging particles from all inlet ports rather than just the pipeline port. Available with multiple seat materials and orifice sizes, the EX2’s capsule ensures optimum performance in any application. AURA’s proprietary machining process enables metal to metal seals to guarantees the highest leak integrity available and yields surface finishes of 4-25 Ra designed to reduce corrosion. With its minimal internal volume, the EX2 also allows less gas to be used while purging. The AURA EX2 is assembled in a Class 100 clean room as a complete assembly with all gauges, fittings, and valves attached. The complete assembly is cleaned for oxygen service and is 100% helium leak checked. Additionally, the EX2 undergoes multiple flow and function tests to ensure the highest level of purity and durability.
EXB Series Back Pressure Reducing Regulator
The AURA EXB back pressure regulator provides adjustable relief of excess pressure in closed loop systems caused by spikes in inlet pressure up to 500 psig. AURA’s dual surface diaphragm or dynamic cartridge sensing elements increase the precision and flexibility of pressure control. This allows the end user to accurately throttle excess pressure from the system, whereas standard relief devices only provide open and close functions. AURA’s proprietary machining process yields surface finishes of 4-25 Ra designed to reduce corrosion. The AURA EXB is assembled in a Class 100 clean room as a complete assembly with all gauges, fittings, and valves attached. The complete assembly is cleaned for oxygen service and is 100% helium leak checked. Additionally, the EXB undergoes multiple flow and function tests to ensure the highest level of purity and durability.
EXC Series Compact Single Stage Pressure Reducing Regulator
The AURA EXC is a general purpose regulator that provides accurate and reliable pressure control of gases and liquids up to inlets of 5500 psig where space is at a premium. AURA’s encapsulated seat design consolidates the numerous moving internal components of a standard regulator into one single piece, allowing for ease of maintenance and minimizing potential failure points. Protected by a 10-micron 360° filter, the encapsulated seat provides significantly more filtration of impurities than the standard pressed-in disk. The encapsulated seat also filters damaging particles from all inlet ports rather than just the pipeline port. Available with multiple seat materials and orifice sizes, the EXC’s capsule ensures optimum performance in any application worldwide. The EXC’s ultra-compact design minimizes weight and footprint to allow for easy integration into a system or cabinet. The all metal construction ensures long life cycle in harsh environments. The AURA EXC is assembled in a Class 100 clean room as a complete assembly with all gauges, fittings, and valves attached. The complete assembly is cleaned for oxygen service and is 100% helium leak checked. Additionally, the EXC undergoes multiple flow and function tests to ensure the highest level of purity and durability.
EXF Series High-Flow Single Stage Pressure Reducing Regulator
The AURA EXF is designed to provide primary control of high flow gases and liquids at delivery pressures up to 250 psig. The EXF’s balanced stem seat design enables the use of larger orifices and seat sizes to accommodate higher flow rates. In addition, it eliminates the need for spring assisted shutoff of the inlet stream so fluctuations in outlet pressure are minimized. AURA’s dual surface diaphragm also provides sensitive pressure control even at low pressures while the EXF’s large .8 orifice size and ½” process ports allow for maximum flow. AURA’s proprietary machining process yields surface finishes of 4-25 Ra designed to reduce corrosion. With its minimal internal volume, the EXF also allows less gas to be used while purging. Each EXF regulator is assembled in a Class 100 clean room as a complete assembly with all gauges, valves, and fittings attached. The complete assembly is 100% helium leak checked and cleaned for oxygen service. Additionally, the EXF undergoes multiple flow and function tests to meet the harsh demands and rugged environment of any application worldwide
EXH Series High Pressure Single Stage Reducing Regulator
The AURA EXH series incorporates a self-relieving valve that enables full range adjustment in closed looped systems. Unlike other designs, the AURA EXH utilizes high yield strength materials to ensure long life on load bearing components. These materials allow repeated adjustment without binding or failure for applications up to 6,000 psi. EXH’s Capsule® seat design ensures seat reliability under harsh conditions. Seat failure due to repetitive loading is eliminated by the Capsule®’s positive stop design. Available in nickel plated brass and 316L make the EXH an economical choice for high pressure charging or test bench applications in the aerospace, hydrostatic, and oil field industries.
EXS Sub-Atmospheric Single Stage Pressure Reducing Regulator
The AURA EXS is a precision single stage regulator designed to provide control under sub-atmospheric conditions in addition to low flow positive pressure applications. The proprietary hybrid spring design works in tandem with the EXS’s exclusive oversized dual surface diaphragm, allowing precision pressure control under vacuum and positive pressure from 0 psia to 100 psig. AURA’s encapsulated seat design consolidates the numerous moving internal components of a standard regulator into one single piece, allowing for ease of maintenance and minimizing potential failure points. Protected by a 10-micron 360° filter, the encapsulated seat provides significantly more filtration of impurities than the standard pressed-in disk. The encapsulated seat also filters damaging particles from all inlet ports rather than just the pipeline port. Each EXS regulator is assembled in a Class 100 clean room as a complete assembly with all gauges, valves, and fittings attached. The complete assembly is 100% helium leak checked and cleaned for oxygen service. Additionally, the EXS undergoes multiple flow and function tests to meet the harsh demands and rugged environment of any application worldwide
EXT High Temperature Single Stage Pressure Reducing Regulator
The AURA EXT series is designed to control the pressure of gases and liquids at elevated temperatures and ambient process environments as high as 500°F. AURA’s encapsulated seat design consolidates the numerous moving internal components of a standard regulator into one single piece, allowing for ease of maintenance and minimizing potential failure points. Protected by a 10-micron 360° filter, the encapsulated seat provides significantly more filtration of impurities than the standard pressed-in disk. The encapsulated seat also filters damaging particles from all inlet ports rather than just the pipeline port. AURA’s proprietary machining process yields surface finishes of 4-25 Ra designed to reduce corrosion. With its minimal internal volume, the EXT also allows less gas to be used while purging. Each EXT regulator is completely assembled with all fittings attached and is 100% helium leak checked. Additionally, the EXT undergoes multiple flow and function tests to meet the harsh demands and rugged environment of any application worldwide.
EXV Vaporizing Regulators
The AURA EXV provides steady and reliable heat to vaporize and maintain gas phase of samples for analysis. AURA’s encapsulated seat design consolidates the numerous moving internal components of a standard regulator design into one single piece, allowing for ease of maintenance and minimizing potential failure points. Protected by a 10-micron 360° filter, the encapsulated seat provides significantly more filtration of impurities than the standard pressed-in disk. The encapsulated seat also filters damaging particles from all inlet ports rather than just the pipeline port. The EXV's proprietary labyrinth style flow path provides steady and reliable heat. Unlike a wire wrapped design, the EXV keeps the sample in contact with the heated surface longer as it traces its way through the large orifice flow path. This feature minimizes sample condensation as it travels through the regulator and across the pressure drop of the seat. AURA’s proprietary machining process enables metal to metal seals to ensure the highest leak integrity available and yields surface finishes of 4-25 Ra designed to reduce corrosion. Each EXV regulator is 100% helium leak checked and undergoes multiple flow and function tests to ensure the highest levels of durability and performance.
EXZ Sub-Atmospheric Back Pressure Regulator
The AURA EXZ sub-atmospheric back-pressure regulator provides adjustable relief of excess positive pressure in systems operating under vacuum caused by pressure buildup or upstream sample injection. The proprietary hybrid spring design operates in conjunction with the EXZ's oversized dual-surface diaphragm to ensure the highest level of precision and repeatability. Multiple seat material options eliminate reaction with the media. This allows the user to accurately throttle excess positive pressure from the system to maintain optimal process conditions. Each EXZ regulator is assembled in a Class 100 cleanroom as a complete assembly with all gauges, fittings, and valves attached. The completed assembly is 100% helium leak checked and cleaned for oxygen service. Additionally, the EXZ undergoes multiple flow and function tests to meet the harsh demands and rugged environments of any application worldwide.
AURA 49X - Single Stage Ultra-High Pressure Reducing Regulator
The AURA 49X Series regulators are intended for primary pressure control of non-corrosive gases at a maximum inlet pressure of 6000 PSIG. Available in either chrome-plated brass or 316L stainless steel, these regulators are used in applications such as laboratory research and development, chemical manufacturing, pharmaceutical manufacturing and gauge calibration. With both front and rear panel-mounting options included, combined with AURA's encapsulated seat design, the 49X Series provides the flexibility and reliability for critical high pressure applications.